Standard Labubu Figure Dimensions
A standard Labubu figure in the most common retail size stands approximately 17–18 cm (about 6.7–7 inches) tall, with a body width of roughly 9–10 cm at the widest point (usually the ears or the hips) and a depth of approximately 7–8 cm front to back. The ears are the most dimensionally tricky element — they flare outward and upward, making the figure taller than it might appear when sitting on a base.
Mini or small editions run closer to 8–10 cm tall and 5–6 cm wide. Mega-size figures (30–40 cm) require completely different case specifications. This guide focuses on the standard retail size that represents the vast majority of Labubu collections, including the four Voxelyo editions: Duck Bubu, Snow Wing Bubu, Angel Bubu, and Pink Fang Bubu.
Always add a minimum 2 cm clearance on every side when selecting a case — more on top to account for the ears. A figure that presses against the case lid or walls will eventually leave pressure marks on painted surfaces, especially in warmer environments where vinyl softens slightly.
Recommended Interior Dimensions
For a single standard Labubu figure, the ideal acrylic case interior dimensions are: height 22–24 cm (accounts for the figure plus base plus ear clearance), width 14–16 cm, and depth 12–14 cm. This gives a comfortable 3–4 cm of air space above the ears and roughly 2–3 cm on each side. The figure should sit centered without being cramped.
For a two-figure side-by-side display in a single case, target an interior width of 28–32 cm, keeping height and depth the same as the single-figure spec. Three figures in a row need 42–48 cm of interior width. At four or more figures, a cabinet-style enclosure with dedicated shelves becomes more practical and cost-effective than wide flat cases.
If you're displaying a figure on its original box insert (a common collector choice that adds height), add the insert height to your case height calculation. Most standard Labubu box inserts add 2–3 cm of elevation, so bump your minimum case height to 26–27 cm for this configuration.
Acrylic Thickness and Material Quality
Acrylic case wall thickness directly correlates with UV resistance, impact resistance, and resistance to yellowing over time. For a display case that will last 5+ years without visible yellowing, look for a minimum wall thickness of 3 mm. Premium cases use 4–5 mm acrylic and are noticeably more rigid. Cases with 2 mm walls are common at budget price points but will flex visibly when handled and yellow faster under ambient light.
UV-filtering acrylic is worth the price premium if your display area receives any direct or indirect sunlight. Standard clear acrylic transmits virtually all UV wavelengths, which will fade paint finishes on figures over years of exposure. UV-filtering acrylic (sometimes marketed as UV-resistant or museum-grade) blocks 99% of UV-A and UV-B transmission while remaining visually transparent. The visual difference between standard and UV-filtering acrylic is minimal to the naked eye.
Avoid cases with visible internal seams or glue joints — these indicate lower construction quality and are the first points to fail when the case is handled or cleaned. The best acrylic cases are laser-cut and solvent-bonded with clean invisible seams. A quick test: look at the case at an angle under bright light; clean construction shows no bubbling, clouding, or visible adhesive residue at the joints.
Base Options and Display Stability
Acrylic cases come in two primary base configurations: open-bottom (the case slides over the figure and sits directly on the shelf) and closed-bottom (the figure sits inside an enclosed box). Closed-bottom cases offer better dust sealing; open-bottom cases allow you to reposition the figure without lifting the case. For permanent display, closed-bottom is the better dust-protection choice.
Some cases include a raised acrylic platform inside the case that elevates the figure for a more dramatic presentation. A 2–3 cm internal riser looks proportionally correct for a standard Labubu and adds a premium display aesthetic. If you build your own case collection, standardizing riser heights makes multi-case shelf arrangements look intentional rather than random.
Stability matters on wooden or glass shelves where vibration (from nearby speakers, foot traffic, or doors closing) can walk figures toward shelf edges over time. A 3 mm foam adhesive dot on the underside of each case base stops this migration without permanently bonding the case to the shelf. This is especially important for earthquake-prone regions or homes with active pets.